Printable PVC

CDP-DP white is an introductory film which is known to be economical, so ours is widely used in the industry.

 

  • Matte finish
  • Vivid photo-like quality
  • High wash resistance

 

Share this

WE RECOMMEND THE FOLLOWING
CONDITIONS TO ACHIEVE THE BEST RESULTS :

Temperature

150℃

Pressure

34psi

Time

10s

Peel Type

Hot peel

Washing

Machine and handwash only

How To Use

Step 1

SET MATERIAL
  • Feed the material into the printer skin side facing up.

Step 4

TRANSFER
  • In order to remove the design from PET, it must be attached to the adhesive side of the MASK PAPER.
  • After application, it’s essential to ensure there are no air bubbles and the design is firmly stuck to the adhesive side.

Step 7

HEAT APPLY
  • Preheat the garment and arrange the transfered design in your desired placement and then press.

Step 2

CUTTING
  • Select an existing design or create your own on the computer
  • Change the machine settings according to the material’s conditions
    (If unsure, see the PDF provided above.)

Step 5

PEEL OFF PET
  • Peel off PET from the transfer to apply to your garment.

Step 8

PEEL OFF MASK PAPER
  • Gently remove MASK PAPER from the top side of the design.

Step 3

WEEDING
  • On a flat surface, take a weeder and remove any parts not neccesary.

Step 6

PREHEAT & POSITION
  • The ideal heating, pressure and time conditions for press can be seen in the photo above.

( *Disclaimer – These instructions may very according to the material and machine type used-for best results check the specifications. )


Reviews

Write a review

There are no reviews yet.